<INITIAL SET UP/INFORMATION> (continued)

4)Unlock the PASSWORD LOCK of level 2.

The PASSWORD LOCK of level 3 will be active.

When The PASSWORD LOCK of level 3 is active, all operations are active except the SET UP button and ALARM INTERRUPT button.

5)Unlock the PASSWORD LOCK of level 3.

The PASSWORD LOCK of all levels will be unlocked.

Functions of all operations can be operable.

For level 1 and 2, press the LOCK button on the front of the unit to display the <UNLOCK PASSWORD> screen. Input the PASSWORD to unlock.

For level 3, press the SET UP button to display the <UN- LOCK PASSWORD> screen and input the PASSWORD.

When the MAIN switch (main power) on the rear is set to ON, the PASSWORD can be registered, set and cancelled even when the POWER button on the front is set to OFF.

To register the PASSWORD • • •

The PASSWORD is registered using a 4 digit number using numbers from 0 ~ 9.

1.Press the SET UP button } <SETTINGS> } Select “PASSWORD” in the <INITIAL SET UP/INFORMATION> screen.

The <PASSWORD> screen appears.

<PASSWORD>

>>OPERATION CONTROL HDD DATA CLEAR

2-1. ( To register the PASSWORD for OPERATION CONTROL for (level 1 to 3) • • • )

Confirm the cursor is positioned at left side of “OPERATION CONTROL”, turn the SHUTTLE ring clockwise.

The <PASSWORD SETTING> screen appears.

<PASSWORD SETTING>

>>1

FIRST

SECOND

----

----

2

----

----

3

----

----

PRESS WARNING RESET BUTTON

TO CLEAR PASSWORD

SHUTTLE>>:TO SET PASSWORD

2-2. Confirm the cursor is moved to the left side of the level “1” , turn the SHUTTLE ring clockwise.

The first input position of “FIRST” will be displayed in reversed color and flashes.

<PASSWORD SETTING>

 

FIRST

SECOND

1

 

---

----

 

2

----

----

3

----

----

PRESS CAMERA BUTTON TO ENTER

PASSWORD

The PASSWORD may consist of the numbers from 1 to 9 which are assigned to the camera number but- tons. 0 is assigned to the ZOOM button.

2-3. Input 4 digits of the PASSWORD by pressing the camera number buttons and the ZOOM button.

The first input position of “SECOND” will be displayed reversed color.

2-4. Input the PASSWORD entered in “FIRST” in “SECOND”.

• The cursor moves to the left side of the setting of level 1.

<PASSWORD SETTING>

FIRST SECOND

>>1

 

 

2

----

----

3

----

----

PRESS WARNING RESET BUTTON

TO CLEAR PASSWORD

SHUTTLE>>:TO SET PASSWORD

Input the same number in “FIRST” and “SECOND”. The setting returns to step 2 if the different PASSWORD number is inputted.

2-5. Repeat steps 2-2 ~ 2-4 to set level 2 and 3.

It is not necessary to input the PASSWORD all lev- els 1, 2 and 3. Input the PASSWORD in the desired level only.

2-6. Turn the SHUTTLE ring counterclockwise.

3-1. ( To register the PASSWORD for HDD DATA CLEAR for (level 4) • • • )

Turn the JOG dial to move the cursor to “HDD DATA CLEAR”, turn the SHUTTLE ring clockwise.

• The <PASSWORD SETTING> screen appears.

<PASSWORD SETTING>

FIRST SECOND

>>4 ---- ----

3-2. Repeat steps 2-2 ~ 2-4 to set level 4.

4.Turn the SHUTTLE ring counterclockwise, or press the SET UP button.

To unlock the PASSWORD • • •

1.( To unlock the PASSWORD for level 1 and 2 • • • ) Press the LOCK button.

The <UNLOCK PASSWORD> screen appears.

<UNLOCK PASSWORD>

>>1 ----

2----

EXECUTE

SHUTTLE>>:TO SET PASSWORD

2.Confirm the cursor is moved to the left side of level “1” and turn the SHUTTLE ring clockwise.

The first digit reverse in color.

3.Input 4 digits of the PASSWORD by pressing the camera number buttons or the ZOOM button.

The cursor moves to the left side of the setting of level 1.

4.Turn the JOG dial to select the level “2” and turn the SHUTTLE ring clockwise.

The first input position will be displayed reversed color.

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

•••••••••••••

64

Page 64
Image 64
Mitsubishi Electronics DX-TL2500U To register the Password, To unlock the Password, Repeat steps 2-2 ~ 2-4 to set level 2