Mitsubishi Electronics DX-TL2500U Communications by Web Browser, Connections, Authentication

Communications by Web Browser

■Communications by Web Browser

This unit can communicate with a PC via Web browser. Live and pre-recorded images can be viewed from this mode.

♦The personal computer product requirements

•OS : Microsoft Windows 98SE, Windows 2000, Windows ME or Windows XP.

•CPU : IBM PC/AT compatible with an Intel Pentium series processor of at least 500MHz.

•RAM : 256MB or more.

•Hard disk drive : System drive with unused space of at least 200MB.

•Web Browser Soft : Microsoft Internet Explorer 5.01SP2 or later.

•Display device : XGA (1024 pixels x 768 pixels) or higher.

Microsoft and Windows are registered trade- marks of the Microsoft Corporation in the US and other regions.

(The official name of Windows is Microsoft Windows Operating System.)

All other company and product names appearing herein are the property of their respective owners.

•Windows 98SE is an abbreviation of Microsoft Windows 98 Second Edition.

•Windows 2000 is an abbreviation of Microsoft Windows 2000 Professional.

•Windows Me is an abbreviation of Microsoft Windows Millennium Edition.

•Windows XP is an abbreviation of Microsoft Windows XP Home Edition/Professional.

The product requirement described above can- not guarantee operations in all environments.

Lack of compatibility between Web functions and the PC peripheral driver may, in rare instances, re- sult in abnormal operation. If this happens, upgrade to the newest version of Internet Explorer and try again.

♦Connections

•When making a direct connection between this equip- ment and a personal computer (here in after PC), use a cross cable and when making a connection through a HUB, use a straight cable.

•The duplex mode is half duplex.

•Refer to the PC instruction manual for instructions on how to set the Web settings on the PC.

♦AUTHENTICATION

Start up the Microsoft Internet Explorer and log in.

1.Start up the Microsoft Internet Explorer and enter the IP address of the DVR.

•The “[Authentication]” screen will appear.

2-1. (When logging in • • • )

First, enter the “userID” and then enter the “password”. When shipped from the factory, the userID for the full-rights user is “root”, and the password is “admin000”, the userID for the live user is “guest” and the password is “guest”. Lower case only.

More than one user can log in simultaneously using the same userID and password.

There are restrictions due to authorization. The maximum number of users that can be connected at the same time is 10.

2-2. Select “log in” and then left-click or press ENTER.

• The “Welcome” screen will appear.

3-1. (If you make an error in entering the userID or password

•• • )

•The “[Rejection]” screen will appear.

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

86