Mitsubishi Electronics DX-TL2500U Archive Source HDD, Archive Start Position Reset

3.Select “ON” by turning the JOG, and turn the SHUTTLE ring clockwise.

•The setting is made, and the display stops flashing.

If a power failure occurs during archive, the ar- chive will not restart automatically after the power is restored. Press the ARCHIVE button to restart ar- chive. When Timer record setting has been preset, the archive will automatically restart after the power is restored, but from the point that the unit started archive before the power failure occurred.

♦ARCHIVE SOURCE HDD

The ARCHIVE device can be set to archive data from the MAIN HDD or SUB HDD.

<HDD	SETTINGS>	ON
HDD	REPEAT REC MAIN
HDD	REPEAT REC SUB	OFF
HDD REPEAT PLAY		OFF
IM-CHECK PLAY		OFF
SEQUENTIAL PLAY		OFF
FIFO OVERWRITE MODE		OFF
>>ARCHIVE SOURCE HDD		MAIN

ARCHIVE START POSITION RESET

Confirm that the peripheral recording device is correctly connected to ID4 or ID5, and “ARCHIVE• COPY” is selected on “ID4•ID5” before making AR- CHIVE START POSITION RESET settings.

1.Press the SET UP button } <SETTINGS> } <INITIAL SET UP/INFORMATION> } Select “ARCHIVE START POSITION RESET” in the <HDD SETTINGS> screen, turn the SHUTTLE ring clockwise.

•The <ARCHIVE START POSITION RESET> screen is displayed.

<ARCHIVE START POSITION RESET>

>>EXECUTE

2.Turn the SHUTTLE ring clockwise.

•The ARCHIVE POINT is reset.

This setting appears when “ARCHIVE•COPY” is selected on “ID4•ID5” of the <INITIALIZATION> screen, and the HDD SETTING is set to “PARTI- TION”.

Settings ( default : “MAIN” )

“MAIN” : Archive MAIN HDD only.

“SUB” : Archive SUB HDD only.

1.Press the SET UP button } <SETTINGS> } <INITIAL SET UP/INFORMATION> } Select “ARCHIVE SOURCE HDD” in the <HDD SETTINGS> screen, and display the desired setting.

2.Turn the SHUTTLE ring counterclockwise or press the SET UP button to exit.

3.Press the ARCHIVE button.

•The ARCHIVE device commences archive.

♦ARCHIVE START POSITION RESET

The unit automatically keeps track of the end point of HDD archive. This function is used to reset this ARCHIVE POINT. After reset, the ARCHIVE POINT returns to the position of the earliest stored data.

<HDD	SETTINGS>	ON
HDD	REPEAT REC MAIN
HDD	REPEAT REC SUB	OFF
HDD REPEAT PLAY		OFF
IM-CHECK PLAY		OFF
SEQUENTIAL PLAY		OFF
FIFO OVERWRITE MODE		OFF
ARCHIVE SOURCE HDD		MAIN

>>ARCHIVE START POSITION RESET

This setting appears when “ARCHIVE•COPY” is selected on “ID4•ID5” of the <INITIALIZATION> screen.

Points to be careful regarding archive

•When archive is performed during record, an image may not be recorded at the time of an archive start and an end. Be careful.

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations

55