Mitsubishi Electronics DX-TL2500U Basic manual recording, Timer Program Settings screen see

■Basic manual recording

Information on normal recording is provided bolow. Before starting recording, recording settings must be checked. After checking the settings of “HDD REPEAT REC MAIN”, “HDD REPEAT REC SUB” in the <HDD SETTINGS>

screen ( see page 53), the REC mode settings are made.

Settings here are for normal recording only. For timer recording, settings must be made on the

<TIMER PROGRAM SETTINGS> screen ( see page 50).

♦Setting the recording interval and recording picture quality for normal recording

To perform normal recording, “PPS” and “GRADE” must be set for each camera.

Setting of “PPS” ( default : “1.875P” )

“3.75P”, “1.875P”, “1.25P”, “0.938P”, “0.75P”, “0.625P”, “0.375P”, “0.25P”, “0.125P”, “0.063P”, “0.031P”, “0.016P”, “- - - - - -”

“- - - - - -” : Indicates that the camera is not active and recording cannot be performed with this cam- era.

Available recording intervals will vary according to the number of cameras operating or ALARM RE-

CORDING settings ( see page 47). Interval dis- plays will be according to the chart.

Setting of “GRADE” ( default : “STD” )

“SUPER”, “HIGH”, “STD”(STANDARD), “BASIC”, “LONG”

Example : Set “PPS” of camera number “1 ” to “0.25P” and “GRADE” to “HIGH” for normal recording.

1.Press the SET UP button to display the <SETTINGS> screen.

2.Turn the JOG dial to move the cursor to “RECORD SETTINGS” and turn the SHUTTLE ring clockwise.

•The <RECORD SETTINGS> screen appears.

<RECORD	SETTINGS>
>>ALARM SETTING
RECORD	SETTING	5S
ALARM REC DURATION
MOTION	DET REC	ALARM
ARCHIVE OVERWRITE		OFF
ARCHIVE MEDIA AUTO EJECT		OFF

3.Turn the JOG dial to move the cursor to “RECORD SETTING” and then turn the SHUTTLE ring clockwise.

•The <RECORD SETTING> screen appears.

<RECORD SETTING> 1/2

Camera selection during alarm recording

<RECORD SETTING>				>>ALARM
NO	PPS	GRADE	A-PPS		A-	GRADE
1	1.875P	STD	1.875P		STD
2	1.875P	STD	1.875P		STD
3	1.875P	STD	1.875P		STD
4	1.875P	STD	1.875P		STD
5	1.875P	STD	1.875P		STD
6	1.875P	STD	1.875P		STD
7	1.875P	STD	1.875P		STD
8	1.875P	STD	1.875P		STD
9	1.875P	STD	1.875P		STD
NEXT PAGE		SHUTTLE<<:BACK

<RECORD SETTING> 2/2

<RECORD SETTING>			ALARM
NO	PPS	GRADE	A-PPS	A-GRADE
>>10	1.875P	STD	1.875P	STD
11	1.875P	STD	1.875P	STD
12	1.875P	STD	1.875P	STD
13	1.875P	STD	1.875P	STD
14	1.875P	STD	1.875P	STD
15	1.875P	STD	1.875P	STD
16	1.875P	STD	1.875P	STD
PRE ALARM REC			( S )	S
<ESTD REC>		SHUTTLE<<:BACK
			D H M

CAUTION : For <ESTD REC>, see “Continuous recording time table”, pages 92, 93.

About <ESTD REC >

•The estimated recordable time is displayed as <ESTD REC> depending on the “PPS” and “GRADE” settings. (The time will not change when changing the alarm recording settings.)

The RECORD SETTING consists of 2 pages. The next page appears when select “NEXT PAGE” (turn

the SHUTTLE ring clockwise) as shown below .

4.Turn the JOG dial to move the cursor to “1 ”, and then turn the SHUTTLE ring clockwise.

•The “PPS” setting reverses in color.

<RECORD SETTING>			ALARM
NO	PPS	GRADE	A-PPS	A-GRADE
1	1.875P	STD	1.875P	STD
2	1.875P	STD	1.875P	STD
3	1.875P	STD	1.875P	STD
4	1.875P	STD	1.875P	STD
5	1.875P	STD	1.875P	STD
6	1.875P	STD	1.875P	STD
7	1.875P	STD	1.875P	STD
8	1.875P	STD	1.875P	STD
9	1.875P	STD	1.875P	STD
NEXT PAGE		SHUTTLE<<:BACK

5.Turn the SHUTTLE ring clockwise again.

•The background of the “PPS” setting turns red and flashes.

<RECORD SETTING>			ALARM
NO	PPS	GRADE	A-PPS	A-GRADE
1	1.875P	STD	1.875P	STD
2	1.875P	STD	1.875P	STD
3	1.875P	STD	1.875P	STD
4	1.875P	STD	1.875P	STD
5	1.875P	STD	1.875P	STD
6	1.875P	STD	1.875P	STD
7	1.875P	STD	1.875P	STD
8	1.875P	STD	1.875P	STD
9	1.875P	STD	1.875P	STD
NEXT PAGE		SHUTTLE<<:BACK

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Basic Operations

27