Mitsubishi Electronics DX-TL2500U Quick Settings, This unit can save or load Menu settings stored

<QUICK SETTINGS>

■QUICK SETTINGS

This unit can save or load Menu settings stored

on the Compact Flash Card.

During execution of menu quick settings, other op- erations are not accepted.

5. (Finalizing updated menu settings • • • )

Turn the SHUTTLE ring counterclockwise three times, or press SET UP button to return to the normal screen.

6.Press the POWER button to turn the unit off, then press it once more to turn the unit back on.

•The setting is confirmed.

♦To update menu settings of this unit

To read/alter menu settings stored on the Compact Flash Card using the unit, synchronize the HDD setting to that of the unit the menu settings were copied to. The HDD setting that needs to be synchronized is the “ID4•ID5”, “HDD SETTING”, and “PARTITION SIZE”.

If the HDD settings are not synchronized, the menu settings are not updated.

1.Insert a Compact Flash Card recorded with menu settings into the COMPACT FLASH slot of this unit.

2.Select “QUICK SETTINGS” in the <SETTINGS> screen and turn the SHUTTLE ring clockwise.

•The <QUICK SETTINGS> screen appears.

<QUICK SETTINGS>

>>LOAD SETTING DATA FROM CFC SAVE SETTING DATA TO CFC

3.Select “LOAD SETTING DATA FROM CFC” and turn the SHUTTLE ring clockwise.

•The <SETTING DATA LOADING> screen appears.

•To cancel the update of menu settings, turn the SHUTTLE ring counterclockwise.

<SETTING DATA LOADING>

>>EXECUTE

SHUTTLE>>:EXECUTE,<<:BACK

4.Turn the SHUTTLE ring clockwise.

•The menu settings of this unit is updated and <<COMPLETED>> appears on the screen.

•When no Compact Flash Card has been inserted <<MEDIA ERROR>> will appear on the screen.

Turn off/on POWER to finalize updated menu set- tings.

When change affects the data settings of “IP AD- DRESS”, “SUB NET MASK” or “GATEWAY” of the <ETHERNET> the power will be turned off/on auto- matically.

♦To save menu settings of this unit to a Compact Flash Card

1.Insert a Compact Flash Card into the COMPACT FLASH slot of this unit.

2.Select “QUICK SETTINGS” in the <SETTINGS> screen and turn the SHUTTLE ring clockwise.

•The <QUICK SETTINGS> screen appears.

3.Select “SAVE SETTING DATA TO CFC” and turn the SHUTTLE ring clockwise.

•The <SETTING DATA SAVING> screen appears.

•When not saving the menu settings to the Compact Flash Card, turn the SHUTTLE ring counterclockwise.

<SETTING DATA SAVING>

>>EXECUTE

SHUTTLE>>:EXECUTE,<<:BACK

4.Turn the SHUTTLE ring clockwise.

•The menu settings are overwritten in the Compact Flash Card and <<COMPLETED>> appears on the screen.

•When no Compact Flash Card has been inserted <<MEDIA ERROR>> will appear on the screen.

5.Turn the SHUTTLE ring counterclockwise or press the SET UP button to exit.

The execution of LOAD/SAVE in the menu is pos- sible only while the unit is in stop mode.

LOAD/SAVE function takes a few seconds after performing “EXECUTE”.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• •••••••••••••

66