Mitsubishi Electronics DX-TL2500U Information/Service, Setting of Alarm Sens default OFF

Setting of “ALARM SENS” ( default : “OFF” )

“ON” : When alarm terminal is activated, the DVR trans- mits the status information to connected PC. E-mail is sent to address displayed on “USER ADDRESS” of the <E-MAIL ADDRESS> screen.

“OFF” : Does not transmit.

Setting of “REC MODE” ( default : “OFF” )

“ON” : Transmits the recording status such as normal recording or alarm recording to connected PC. E-mail is sent to address displayed on “USER ADDRESS” of the <E-MAIL ADDRESS> screen.

OFF : Does not transmit.

Setting of “RETRY TIME” ( default : “10S” )

1S, 2S, • • • •, 10S, • • • • • • 59S, 60S

7.Turn the JOG dial to display the desired setting and turn the SHUTTLE ring clockwise.

•The setting is confirmed and stops flashing.

8.Turn the SHUTTLE ring counterclockwise to return to the <ETHERNET> screen, and press the SET UP button.

9.When the setting are changed, the unit turns off and on automatically updating the new settings.

■CAMERA CONTROL

Select camera type, protocol control, baud rate and ad- dress of each camera connected.

The optional remote control R-2500 is required, press display button on remote till PTZ is displayed for control.

Setting of “PTZ CONTROL”

“PELCO-2400” : PELCO “D”PROTOCOL 2400bps

“PELCO-4800” : PELCO “D”PROTOCOL 4800bps

“PELCO-9600” : PELCO “D”PROTOCOL 9600bps

“A.D.” : American Dynamics RS-422/RS-485 protocol 4800bps

“OMIKRON” : OMIKRON protocol converter 192000bps

Setting of “ADDRESS” ( default : “001” ) “001”, “002”, • • • • • • • • • •, “127”, “128”

Please set a “ADDRESS” setting as the same set- ting as ADDRESS of a camera.

Please contact your sales agent for dealer.

1.Press the SET UP button } <SETTINGS> } Select “CAMERA CONTROL” in the <INITIAL SET UP/ INFORMATION> screen and turn the SHUTTLE ring clockwise.

•The <CAMERA CONTROL> screen appears.

<CAMERA CONTROL> 1/2

<CAMERA CONTROL>		ADDRESS
NO PTZ CONTROL
>> 1	-----	001
2	-----	001
3	-----	001
4	-----	001
5	-----	001
6	-----	001
7	-----	001
8	-----	001
9	-----	001

NEXT PAGE

<CAMERA CONTROL> 2/2

<CAMERA CONTROL>			ADDRESS
>>	NO PTZ CONTROL
	10	-----	001
	11	-----	001
	12	-----	001
	13	-----	001
	14	-----	001
	15	-----	001
	16	-----	001

■INFORMATION/SERVICE

The <INFORMATION/SERVICE> screen is used to check the warning log, device lists and initialization menu after a power failure. The total operating time is displayed on the 2/2 screen.

<INFORMATION/SERVICE> 1/2

<INFORMATION/SERVICE> (1/2)

>>HDD INFORMATION ARCHIVE/COPY INFORMATION CFC INFORMATION

WARNING LOG LIST

RESET TO FACTORY SETTINGS

MAIN HDD DATA CLEAR

SUB HDD DATA CLEAR

CFC DATA CLEAR

ARCHIVE DATA CLEAR

COPY DATA CLEAR

<INFORMATION/SERVICE> 2/2

<INFORMATION/SERVICE> (2/2)

ELAPSED TIME: SYSTEM 3H ARCHIVE 0H COPY 0H

HDD SETTING	PARTITION
PARTITION SIZE	10%

The <INFORMATION/SERVICE> screen consists of 2 pages. The second page is displayed by turning the JOG dial clockwise when the cursor points at the setting of the bottom of the screen.

“ARCHIVE/COPY INFORMATION”, “COPY DATA CLEAR”, and “ARCHIVE DATA CLEAR” appear on page 1/2 of the <INFORMATION/SERVICE> screen when “ARCHIVE•COPY” is selected on “ID4•ID5” of the <INITIALIZATION> screen.

“ARCHIVE” and “COPY” operating time appear on page 2/2 of the <INFORMATION/SERVICE> screen when “ARCHIVE•COPY” is selected on “ID4•ID5” of the <INITIALIZATION> screen.

“SUB HDD DATA CLEAR” appears on page 1/2 of the <INFORMATION/SERVICE> screen when “PAR- TITION” is selected on “HDD SETTING” of the <INI- TIALIZATION> screen.

♦HDD INFORMATION/ARCHIVE/COPY INFORMATION/CFC INFORMATION

This INFORMATION is used to check the connection status of all internal and external peripheral recording devices, and the amount of available apace (HDD, AR- CHIVE/COPY/Compact Flash Card).

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations

61