Basic Operations

■How to use JOG dial and SHUTTLE ring

This unit is available to set the operating conditions on the menu display, depending on the purpose. There are some difference in the setting process between each menu. The following explains the basic setting process which uses the JOG dial and the SHUTTLE ring.

♦Setting the character size

Example: Setting the CHARACTER SIZE to “LARGE” (the default setting is “SMALL”).

1.Press the SET UP button on the front of the Unit.

•The <MENU SETTING> menu will appear.

<MENU SETTING>￿

@TIME DATE DISPLAY￿ MPX FUNCTIONS￿ TIMER PROGRAM

2.Make sure that the cursor is set to the TIME DATE DISPLAY and turn the SHUTTLE ring to the right.

•Turning the SHUTTLE ring to the right displays the next menu.

SHUTTLE ring

3.Turn the JOG dial to select the CHARACTER SIZE.

•Turning the JOG dial to the right moves the cursor downward. Turning the JOG dial to the left moves the cursor upward.

JOG dial

4.Turn the SHUTTLE ring to the right to flash the sub-item.

•The sub-item “SMALL” will start flashing.

<TIME DATE DISPLAY>￿

DISPLAY MODE￿

2￿

@CHARACTER SIZE￿

SMALL￿

CLOCK LOCATION

OFF

While the sub-item is flashing, the menu display will not disappear when you press the SET UP but- ton.

5.Turn the JOG dial to change the sub-item to “LARGE”.

•The “LARGE” will start flashing.

<TIME DATE DISPLAY>￿

DISPLAY MODE￿

2￿

@CHARACTER SIZE￿

LARGE￿

CLOCK LOCATION

OFF

6.Turn the SHUTTLE ring to the right to enter the selection.

• The sub-item will stop flashing.

<TIME DATE

DISPLAY>￿

DISPLAY MODE￿

2￿

@CHARACTER

SIZE￿

LARGE￿

CLOCK LOCATION

OFF

 

 

 

♦Exiting the menu

The following explains how to exit the menu after its setting by using JOG dial and the SHUTTLE ring.

Example: Exiting the <TIME DATE DISPLAY> menu after setting the character size.

1.Make sure that the sub-item of the selected item is not flashing and changed correctly.

•If the sub-item is flashing, that item is not entered. See steps 4 on the left and enter the setting.

<TIME DATE

DISPLAY>￿

DISPLAY MODE￿

2￿

@CHARACTER

SIZE￿

LARGE￿

CLOCK LOCATION

OFF

 

 

 

•To set additional settings or to confirm the settings,turning the SHUTTLE ring once to the left displays the previous menu.

This operation is not available while the sub-item is flashing.

<MENU SETTING>￿

@TIME DATE DISPLAY￿ MPX FUNCTIONS￿ TIMER PROGRAM

2.Turn the SHUTTLE ring twice to the left .

•The display will return to the present time display.

•Pressing the MENU button which is pressed to display the MAIN MENU also returns the menu display to the present time display.

INFO

SET UP

COPY

SEARCH

MENU

INFORMATION

There are 4 different types of MAIN MENU as shown below:

1)The <MENU SETTING> menu (press the SET UP button to display the menu).

<MENU SETTING>￿

@TIME DATE DISPLAY￿

￿

MPX FUNCTIONS￿

TIMER PROGRAM￿

RECORDING SET UP￿

USER KEY￿

DATA CLEAR SELECTION￿

REAR TERMINAL￿

SERVICE￿

INITIAL SET UP

2)The <SEARCH SELECTION> menu (press the SEARCH button to display the menu).

<SEARCH SELECTION>￿ @TIME DATE SEARCH￿ INDEX SEARCH￿ SKIP SEARCH￿ ALARM LIST SEARCH￿ JUMP TO START POINT

3)The <INFORMATION> menu (press the INFO button to display the menu).

<INFORMATION>￿

 

@RECORDED PERIOD￿

 

CONNECTED SCSI DEVICE￿

￿

 

￿

 

￿

 

￿

 

<ELAPSED TIME>￿

2H￿

MAIN

ARCHIVE

0H￿

COPY

0H

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

••••••••••••••

10