Multiplexer functions

■Multiplexer functions

Please refer to “Multiplexer functions” on Basic Operation page 12 for details about the functions.

♦How to use the ZOOM button

1.Display the ZOOM POINTER (X) by pressing the ZOOM button.

■Multiplexer buttons

The use of SPLIT/SEQUENTIAL button

By pressing the SPLIT/SEQUENTIAL button, you can switch the display mode as follows:

SPLIT 9SPLIT 4a SPLIT 4bSPLIT 4c SPLIT 4 • Sequential Single screen • sequential

The refresh cycle of camera images becomes longer as the number of cameras increases. Smoother images can be viewed when cameras which are not needed are removed from the cameras designated in the CAMERA SETTING parameter on the <MPX FUNCTIONS> menu.

Images are displayed in real time during single screen display.

For details of the Camera number buttons and SPLIT/SEQUENTIAL button, please refer to “The functions of the SPLIT/SEQUENTIAL button, ZOOM button and camera number buttons” on next page.

INFORMATION

You can arrange the layout of all SPLIT DISPLAY settings on SPLIT SCREEN SET-

TING in the <MPX FUNCTIONS> menu. For details please refer to pages 39, “Split screen settings”.

It is also possible settings of SPLIT DISPLAY during playback by pressing the

SPLIT/SEQUENTIAL button:

SPLIT 9 SPLIT 4a

SPLIT 4c SPLIT 4b

When Non-operation camera was set in SPLIT 4 setting on the <SPLIT SCREEN SETTING> menu,

“- ” appears where the camera number is supposed to be displayed.

09-06-2000 12:12:05

13

Ð￿9

You can view any picture in actual screen size by pressing the camera number button during SPLIT/

SEQUENCE button is used.You can go back to the previous SPLIT DISPLAY by pressing the SPLIT/ SEQUENCE button again.

X

2.Move the pointer to the desired position by pressing the camera number buttons 6 to 9.

X

3.Pressing the number 4 button (ZOOM IN)will enlarge the picture twice (X2) and four times (X4) as large as the actual display size.

X2

X4

Pressing the camera number 5 button (ZOOM OUT button) will change the size of the display pic-

ture to actual display size. During enlarged display viewing, cannot display the menu.

The ZOOM POINTER’S position does not change when the display screen changes or when power is

turned off. This is convenient for situations where the desired viewing areas, such as the counter or cash register, are determined in advance. In addi- tion, the ZOOM POINTER can be used during playback of recorded images.

When playing back images from multiple cameras on single screen, if the enlarging control is used

during the pause mode there is a possibility that a black screen will be displayed. In this case, the desired enlarged image can be obtained by moving through frames using the JOG dial.

INFORMATION

• As the enlarge display function involves electronic enlargement, details of the image

will appear pixelized when enlarged.

•Enlarged display is cancelled if the ALARM IN ter- minal is triggered during enlarged display viewing.

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

••••••••••••

•

36