♦Storage space indicator function
This unit is capable of constantly displaying the amount of data recorded in the recording device designated
Also, when the designated remaining amount has been reached, the amount used (%) display will begin flashing. In the case of the HDD, the percent displayed is the percentage relative to the entire HDD storage capacity as recognized in the MAIN HDD setting. In the case of the backup device, the percentage is relative to the storage capacity of the medium.The following settings are necessary to bring these functions into effect.
1)On the <REAR TERMINAL> menu, use CAPAC- ITY REMAIN to select the device and set the re- maining capacity (refer to page 26).
2)On the <TIME DATE DISPLAY> menu, set the DISPLAY MODE to “3” (refer to page 24).
3)Select one screen using the multiplexer buttons. When using the multiple screen display, set the CH. TITLE parameter on the <MPX FUNCTIONS> menu to NONE (refer to page 39).
■Multiplexer functions
You can use a part of multiplexer functions by using the multiplexer buttons placed on front of the unit.
♦Multiplexer buttons
1.Camera number buttons (1 to 9)
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
SPLIT/SEQUENCEZOOM
0
6. MOVE buttons
5.ZOOM OUT button
4.ZOOM IN button
3.ZOOM button
2.SPLIT/SEQUENCE button
You cannot operate the multiplexer buttons when the menu is displayed on screen. The multiplexer functions does not work when the unit is accessing the peripheral recording device or ARCHIVE but- ton, COPY button or PLAY button is flashing.
1. Camera number buttons
By pressing these buttons, the images from cameras connected to CAMERA IN terminals at the rear of the unit will be displayed on screen. If the images of the camera that is not set to be operated is selected on the <CAMERA SET- TING> menu , the
By pressing the camera number buttons, you can view the picture from the camera even it is not set
to be recorded.
2. SPLIT/SEQUENCE button
By pressing this button you can switch the display mode from SPLIT 9 which has been set on the <SPLIT SCREEN SETTING> menu, SPLIT 4 ( type a, b, or c),
3. ZOOM button
When this button is pressed, the ZOOM POINTER (X) appears on the screen. By pressing this button, Camera number buttons 4 to 9 change its function as follows:
4. ZOOM IN button (Camera numbner button 4)
Press this button after pressing ZOOM button, the displayed picture will be enlarged by 2 steps: twice as large and 4 times as large as the original picture size. The enlarging ratio will be displayed on the top
5.ZOOM OUT button (Camera numbner button 5) Press this button anytime after operating ZOOM button and ZOOM IN button, the picture size will be reduced in 2 steps from the enlarged picture. The enlagement ratio will be displayed on the top
6.MOVE buttons (Camera numbner buttons 6 to 9) By pressing these buttons you can move the ZOOM POINTER (X). The picture will be enlarged/reduced from this pointer in the centre. After enlarging reducing the size of the picture, you can also move the whole picture by pressing these buttons. For more details please refer to “Multiplexer buttons” on page 36.
■Basic recordings
The correct settings are necessary for your recordings. For details of each setting, please refer to the following pages of this instruction manual:
The <HDD FULL> menu setting: sets the movement of the unit when it runs out of the recording
capacity of HDD during recording. Please refer to page 30, “HDD repeat recording” setting.
The <CAMERA SETTING> menu setting: sets the cameras to be operated from all connected cam-
eras for each camera usage. Please refer to page 38, “Camera usage setting”.
The <CAMERA USAGE> menu setting: chooses and sets the camera usage from A, B or C on the
<CAMERA SETTING> menu. Please refer to page 38, “Camera usage setting”.
After confirming all settings of recording, please proceed as written on the right.
25F
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• | •••••••••••••• |
12