Using peripheral devices / Using the archive device/copy device

<ALARM LIST SEARCH>￿

￿No.

DATE

TIME

C

0003

26-01-2001

18:54:25 2

0002

26-01-2001

18:34:40 4

@0001

25-01-2001

18:20:00 1

The JOG dial can be used to move the cursor line-by-line through the list. When the cursor

reaches either the top or the bottom of the list, the <ALARM LIST SEARCH> menu will scroll to the next page. To move through the pages, place the cursor over “No.”, and turn the SHUTTLE ring.

When over-writing data stored on the hard disk drive, the start-time for a given Alarm Recording

will be automatically erased from the Alarm List when the image data recorded at the start of that Alarm Recording is over-written.

During playback of the archive device or copy device media, playback can be made using an in-

terval that differs from the recording interval by pressing the PLAY button or the REV PLAY button. Visual quality will depend on the device’s transmission speed.

3.Select the device to be played by pressing the PLAY DEVICE button on the front of this unit. The selected device’s indicator light will turn on.

PLAY DEVICE

Check whether the connected device’s access lamp is on.

4.Press the PLAY button.

•The device will start playing after a still picture has been displayed.

ENGLISH

4.Repeat steps 4 to 6 of Index search on page 50 to display the single screen, to play back and to stop the search results.

■Jump to Start point

A process for finding the start point of oldest recorded data, and delivering that start-point on-screen as a still frame.

1.Press the SEARCH button to display the <SEARCH SELECTION> menu.

2.Turn the JOG dial to move the cursor to JUMP TO START POINT and turn the SHUTTLE ring to the right.

<SEARCH SELECTION>￿

TIME DATE SEARCH￿ INDEX SEARCH￿ SKIP SEARCH￿ ALARM LIST SEARCH￿ @JUMP TO START POINT

3.Turn the SHUTTLE ring to the right when the <JUMP TO START POINT> menu appears.

•The unit begins the first search and displays the still frames of the opening part of the recording on a SPLIT 9 screen. For full-screen viewing of a particular frame, press the button of that image’s camera number.

<JUMP TO START POINT>￿

￿

T u r n t h e SHUTTLE RING￿

>> t o EXECUTE.

To play back search results, press either the PLAY button or the PAUSE button.

4.Press the STOP button to stop searching.

•The display will revert to its original state.

■SCSI ID number allocation

ID0 to ID3 are allocated to the main hard disk drive. ID4 is allocated to the archive device, and ID5 is allocated to the copy device.

■Choosing among the devices

The device to be played can be chosen using the PLAY DEVICE button located on the main unit’s front face. Check to see that the selected device’s PLAY DEVICE indicator is on.

Various play and search options using the SHUTTLE ring are possible during playback of the copy

device, although there will be some delay before images are displayed.

INFORMATION

When the DDS device is used as a peripheral, there will be a few minutes delay in play-

back and eject, depending on the condition of the recording.

■Copying from the hard disk to the copy device

This unit features the capability to use a designated copy device to copy data recorded on its hard disk. In addition, the Copy range can be specified.

The copy device must be connected to ID5 when copying recorded material. Refer to page 18 for more

details on ID numbers.

•Set the COPY DIRECTION on the <COPY SELECTION> menu to “HDD –> COPY”.

•Set the OVERWRITE on the <COPY SELECTION> menu to “OFF”. Refer to page 15 for details on the <COPY SE- LECTION> menu settings.

When “ON” is selected, previously recorded data will be erased and the designated Copy range will

be copied. When “OFF” is specified, copying will begin at a point after the previously recorded data.

1.Press the POWER button.

2.Insert the medium of archive device or copy device.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

Operations

51