Basic Operations (continued)

7.Set the TRANSFER PERIOD.

•Turn the JOG dial to move the cursor next to the “TRANSFER PERIOD” then turn the SHUTTLE ring to the right. The sub- item of “MAN” (manual) will start flashing.

<COPY SELECTION>￿

COPY DIRECTION HDD}COPY￿

OVERWRITEOFF￿

@TRANSFER PERIOD MAN￿ FROM:29-01-01 09:25:24

The following sub-item can be set for the “TRANSFER PERIOD” of copying.

By turning the JOG dial, the sub-item will be changed as below:

MAN A/B S/E

“MAN”: Set the start time and end time of copying manually.

“A/B”: Copy data which is selected by USER KEY (refer to “User set up operation” on page 25).

“S/E”: Copy all data from the device which is recognised as a device to copy from.

8.Turn the JOG dial to move the cursor to the start time, and set the date, month, year, hour, minute and second of the data to copy from.

•Turn the JOG dial to set the start time.

•Turn the SHUTTLE ring to the right to enter the selection.

@TRANSFER PERIOD

MAN￿

FROM:29-01-01

09:25:24￿

TO:29-01-01

09:25:24￿

EXECUTE

 

OFF

9.Turn the JOG dial to move the cursor to the stop time, and set the date, month, year, hour, minutes and second of the data to copy to.

•Turn the JOG dial to set the stop time.

•Turn the SHUTTLE ring to the right to enter the selection.

TRANSFER PERIOD

MAN￿

FROM:29-03-01 00:25:24￿

@TO:29-03-01 01:25:24￿

EXECUTEOFF

10.Set the cursor to EXCUTE and turn the SHUTTLE ring to the right.

• The sub-item “OFF” will start flashing.

11.Turn the JOG dial to select “ON”.

TRANSFER PERIOD

MAN￿

FROM:29-03-01

00:25:24￿

TO:29-03-01

01:25:24￿

@EXECUTE

 

ON￿

T u r n t h e SHUTTLE RING￿

>> t o EXECUTE.

12.Turn the SHUTTLE ring to the right to start copying.

•Press the WARNING RESET button to stop copying.

INFORMATION

You can copy the data even during

recording.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

Basic Operations

16