Multiplexer functions (continued)
5.Check that the top left number (default setting is set to 1) is flashing. Turn the JOG dial to display the desired camera number then turn the SHUTTLE ring to the right to fix setting.
•The flashing will move to the next camera number.
<SPLIT SCREEN SETTING> @SPLIT9
1 2 3
4 5 6
7 8 9
6.Set all camera numbers according to the steps written on the previous page.
7.Check that all camera numbers are set .Turn the SHUTTLE ring to the right to fix setting.
•The flashing will stop.
•Settings cannot be made when the same camera number is
in SPLIT 9 setting mode. When the same camera has been selected, the blinking light will return to its original state even if all the camera numbers have been input. Check to see if the same camera number has been entered; if the same number has been entered, please change the settings.
<SPLIT SCREEN SETTING> @SPLIT9
1 2 3
4 5 6
7 8 9
8.Press the SET UP button.
•The <SPLIT SCREEN SETTING> menu will disappear.
You cannot exit the menu if you set same camera numbers at different positions. In this case,
please change settings.
♦SPLIT 4 setting
SPLIT 4 setting mode, you can choose between a to c of SPLIT 4 display mode. Before you choose the setting, arrange the camera position as you like in this section.
1.Press the SET UP button to display the <MENU SETTING> menu.
2.Turn the JOG dial to move the cursor to MPX FUNCTIONS and turn the SHUTTLE ring to the right.
•The <MPX FUNCTIONS> menu will appear.
3.Turn the JOG dial to move the cursor to SPLIT SCREEN SETTING then turn the SHUTTLE ring to the right.
•The <SPLIT SCREEN SETTING> menu will appear.
CAMERA SETTING |
| |
@SPLIT | SCREEN SETTING | |
SPLIT | P.GRADE | SHARP |
4.Make sure that the cursor is next to “SPLIT4a”. Turn the SHUTTLE ring to the right.
@SPLIT4a SPLIT4b SPLIT4c
1 2 | 5 6 | 1 2 |
3 4 | 7 8 | 3 9 |
5.Repeat steps 5 to 7 of SPLIT 9 setting on this page to set the rest of the position.
•You cannot set the same number in SPLIT 4 setting. If the flashing goes back to the original position, you have to change settings to make sure the same camera numbers are not set at different positions.
6.Press the SET UP button.
•The <SPLIT SCREEN SETTING> menu will disappear.
♦SEQUENTIAL setting
The sequential setting is designed to automatically switch the
1.Press the SET UP button to display the <MENU SETTING> menu.
2.Turn the JOG dial to move the cursor to MPX FUNCTIONS then turn the SHUTTLE ring to the right.
•The <MPX FUNCTIONS> menu will appear.
3.Move the cursor to SEQUENTIAL then turn the SHUTTLE ring to the right.
•The <SEQUENTIAL> menu will appear.
4.Turn the JOG dial to select the desired camera number, then turn the SHUTTLE ring to the right.
•The channel number will start flashing.
<SEQUENTIAL> | TIME 1S | |
SEQ. 1 | CH.@1 | |
2 | 2 | 1S |
3 | 3 | 1S |
4 | 4 | 1S |
5.Turn the JOG dial till desired channel number appears and turn the SHUTTLE ring to the right to enter the selection.
•The flashing will move to “TIME”.
<SEQUENTIAL> | TIME 1S | |
SEQ. 1 | CH.@1 | |
2 | 2 | 1S |
3 | 3 | 1S |
4 | 4 | 1S |
6.Turn the JOG dial to display desired length of time then turn the SHUTTLE ring to the right to fix setting.
•Maximum of 30 seconds can be set.
<SEQUENTIAL> | TIME10S | |
SEQ. 1 | CH.@1 | |
2 | 2 | 1S |
3 | 3 | 1S |
4 | 4 | 1S |
7.Repeat steps 4,5 and 6 above to fix settings for other cameras.
8.(If you wish to display SPLIT 4 between a to c) Turn the JOG dial to move the cursor to SPLIT 4 and turn the SHUTTLE ring to the right to choose pattern from abc or ab.
•The selected pattern will start flashing.
6 | 2 | 10S |
7 | 1 | 10S |
8 | 1 | 10S |
9 | 3 | 15S |
SPLIT4 | @abc | 1S |
SPLIT 4 pictures to be displayed and changed automatically are pictures set on SPLIT SCREEN SETTING on the <MPX FUNCTIONS> menu. Please refer to SPLIT 4 setting on page the left.
Vertical resolution decreases when split screen image quality(SPLIT P.GRADE) is set to “SOFT”.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• | •••••••••••• | • |
40