Troubleshooting
If problems with the unit persist even after you’ve followed the suggestions below, please disconnect the power cord and contact the retailer from whom you purchased the unit.
| Description of problem | Please consult the following |
| Page |
|
|
|
|
|
|
|
| The unit will not turn on. | Is the power cord properly plugged in? |
| - |
|
|
| Is the LOCK indicator light on? |
| 6,7,56 |
|
|
| Is the TIMER REC indicator light on? |
| 6 |
|
| Power is on, but the unit will notIs the LOCK indicator light on? |
| 6,7,56 |
| |
INSTALLATION | operate. | Is the POWER button blinking? (The unit cannot be operated6 |
| ||
| when the POWER button is blinking and it's the same when |
| |||
|
|
| |||
|
| the other buttons and indicator are blinking.) |
| 8,9 ,56 |
|
|
| It is possible that the safety features are in operation. |
|
| |
|
| Restart the unit by pressing the RESET button located at the |
| ||
|
| back of the unit using a ballpoint pen or similar object. |
|
| |
| Images are not appearing on | Are the monitor and camera(s) connected correctly? | 17 |
| |
| the monitor. | Is the unit receiving an input signal from the selected camera?37 |
| ||
|
| Check this by setting the unit to SPLIT 9. |
|
|
|
| The quality of the monitor | Is the connecting cord connected correctly? |
| - |
|
| picture is poor. | Is the camera’s focus adjusted correctly? |
| - |
|
| The unit will not start recording.Is there any recording space left on the disk? |
| - |
| |
|
| The unit begins recording only after the specified recording13 |
| ||
|
| time.Was the unit stopped during the specified recording time? |
| ||
|
| Is the PRE ALARM REC indicator light on? |
| 6 |
|
| The unit will not stop recording.Is the LOCK indicator light on? |
| 6,7,56 |
| |
|
| Is the unit running in Timer Recording mode? If so, cancel |
| ||
RECORDING |
| Timer Recording and press the TIMER REC button once again. |
| ||
| interval set correctly? |
| 46 |
| |
| The unit will not perform RepeatIs the unit running in Repeat Recording mode? |
|
| ||
| Recording. |
|
|
|
|
| The unit will not perform Timer Are the date and current time set accurately? |
| 11 |
| |
| Recording. | Are the Recording | 12,43 |
| |
|
| If the recording interval has been set correctly, then has the43 |
| ||
|
| recording medium been placed in the unit? Has the |
|
|
|
|
| recording medium’s |
|
|
|
|
| Is the HDD Repeat Recording setting set on REC•STANDBY? 47 |
| ||
|
|
|
|
| |
| The unit will not perform Alarm Is the unit in |
| 6 |
| |
| Recording. | Are the peripheral switches, etc., connected correctly? | 17,18 |
| |
|
|
|
|
|
|
PLAYBACK | The unit will not perform | Is the PRE ALARM REC indicator light on? |
| 6 |
|
| Is the LOCK indicator light on? |
| 6,7,56 |
| |
| playback. | Has the image data been erased? |
| 26 |
|
|
| Has the playback device been selected correctly? |
| 51 |
|
|
|
|
| ||
DEVICE | The copying device/archive | Has the recording medium been inserted correctly into the unit? - |
| ||
device does not respond. | Is the unit currently in the middle of loading the recording medium?- |
| |||
|
| ||||
RECORDING |
| Has the playback device been selected correctly? |
| 51 |
|
display. | correctly? |
|
|
| |
| Power is on, but I cannot get | Has the peripheral recording device been selected correctly?18 |
| ||
PERIPHERAL | past the "NOW SET UP ..." | Is the peripheral recording device’s SCSI ID number set | 18,51 |
| |
| Is the SCSI terminator switch off? |
| 8 |
| |
|
|
|
| ||
| The unit will not backup all of | Have limits been placed on the hard disk’s storage capacity?19 |
| ||
| the data on the hard disk. | Inspect the recording medium. |
| 19 |
|
|
| Check the amount of available recording space. |
| 19 |
|
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• | Troubleshooting | ||||
ENGLISH
73