Mitsubishi Electronics DX-TL930E Warnings and CALL OUT output

Warnings and CALL OUT output

■Warnings and their appropriate countermeasures

Options in the CALL OUT options column:

•Selectable: CALL OUT output can be selected/de-selected on the menu.

•Yes: a CALL OUT signal is emitted without prior selection of this function using the menu.

•None: no CALL OUT signal is emitted, but a warning indicator will appear on screen.

Warning	Status		Countermeasure			Canceling	CALL OUT	Reference
						the warning	output
	The internal hard disk drive	• When the warning is canceled, the unit			Press the			46
HDD FULL	is full when either “STOP”	or will start over-writing the oldest data				WARNING	Selectable
	“REC•STANDBY” has been		remaining in the hard disk drive.
						RESET button.		26,27,30
	selected in “HDD REPEAT”.	• Archive or copy data as necessary.
								51-55
	The storage capacity of the					Press the
	hard disk drive is approach	-
HDD NEAR END						WARNING		26
	ing the value entered into		• Archive or copy data as necessary.				Selectable
						RESET button.
	the HDD capacity setting.
ARCHIVE FULL	The storage medium in the	• Replace the medium in the backup				Press the	Selectable	26,27
	backup recording device is		recording device.			WARNING
	full.					RESET button.
	The limit of the archive	• Replace the medium in the backup				Press the
ARCHIVE NEAR END	medium's storage capacity					WARNING	Selectable	26,27
	is being reached.		recording device.			RESET button.
COPY OVERTAKE			• If you do not wish to have the data over-
	Non-backed up data was		written, stop recording.			Press the
ERROR	over-written while the HDD	• Change the settings for recording inter-WARNING					Yes	51-55
ARCHIVE OVERTAKE	was in Repeat mode.		val and image quality(More.	specifically,		RESET button.
ERROR			lengthen intervals and lowre image quality.)
COPY NEAR	The HDD is in Repeat mode,		• If you do not wish to have the data over-
	and data which has not been
OVERTAKE			written, stop recording.
	backed up will be over-written.					Press the	Yes	51-55
ARCHIVE NEAR	(The amount of time remaining	• Change the settings for recording inter-WARNING
OVERTAKE	before the unit begins over-		val and image quality(More.	specifically,		RESET button.
	writing is approx. 5% of the		lengthen intervals and lowre image quality.)
	time indicated as the possible
	recording duration.)
	When using the copy or
COPY SIZE ERROR	restore functions, either the					Press the
	amount of data to be		• Reset the range of backup or copying.
ARCHIVE SIZE ERROR	transferred exceeds the					WARNING	Yes	51-55
			• Replace the archive/copy medium.			RESET button.
RESTORE SIZE ERROR
	limits of the storage medium,
	or there is no data to be
	copied.
			• Check the storage medium in the RDD			Press the
COPY CHECK MEDIA	An error has occurred in		or DDS device. (Insert medium if there
			is none. If medium is present and you			WARNING
ARCHIVE CHECK MEDIA	either the RDD device or						Yes	51-55
			with to use it, undo the write-protection.RESET button.
RESTORE CHECK MEDIA	the DDS device.		If medium is present and you do not
			wish to use it, replace the medium.)
			• Check whether the unit and camera are			• Either turn off
NO SIGNAL						recording or, if the
			properly connected, and that electricity
	Visual signal was absent					visual signal has
(1 2 3 4 5 6 7 8 9)
	for over 5 seconds during		is on.			been restored,	Yes	17,38
			• Check whether the visual signal is
[The warning will	recording.					cancel the warning
			being properly outputted.
indicate the number						• Press the
			• Check whether the unit’s camera
of the non-functioning						WARNING RESET
			setting is set to an empty channel.
camera.]						button.
SYSTEM ERROR			• Confirm that the SCSI cable is properly
REC SYSTEM ERROR						Press the
	SCSI connection error or		connected.
COPY SYSTEM ERROR						WARNING	Yes	17
	system malfunction.		• Restart operation.
ARCHIVE SYSTEM ERROR						RESET button.
			• Inspect the HDD/archive/copy device.
RESTORE SYSTEM ERROR
COPY R/W ERROR	A data-writing error occurred					Press the		18
ARCHIVE R/W ERROR	during backup or copying. • Inspect the archive/copy device.					WARNING	None
RESTORE R/W ERROR						RESET button.

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Warnings and CALL OUT output

ENGLISH

75