Basic Operations (continued)
♦Using the audio recording
This unit can record an audio with an image. The following explains how to set the AUDIO RECORDING to “ON” or “OFF”.
Example: Setting the AUDIO RECORDING to “ON” (the default setting is “OFF”).
1.Press the SET UP button to display the <MENU SETTING> menu.
2.Turn the JOG dial to select the RECORDING SET UP, and turn the SHUTTLE ring to the right.
•The <RECORDING SET UP> menu will appear.
<RECORDING SET UP> | 25F | |
@REC | INTERVAL | |
REC | P.GRADE | HIGH |
AUDIO RECORDING | OFF | |
3.Turn the JOG dial to select the AUDIO RECORDING, and turn the SHUTTLE ring to the right.
•The
<RECORDING SET UP> REC INTERVAL REC P.GRADE @AUDIO RECORDING <ESTD TIME>
4.Turn the JOG dial to change the
•After entering the selection, the available recording time and AUDIO INDICATOR will appear in the <ESTD TIME>.
AUDIO INDICATOR
<RECORDING SET UP> REC INTERVAL @REC P.GRADE
AUDIO RECORDING <ESTD TIME> 
Depending on the setting of the recording picture grade and the recording interval, the audio re-
cording may not be available. If so, the Not audio recordable mark “ 
” will appear next to the <ESTD TIME> in the <RECORDING SET UP> menu.
5.Turn the SHUTTLE ring to the left, or press the SET UP button.
■Basic playback
The recorded image can be played back in various ways. In this Basic Operations, the most basic playback function is explained. Refer to the pages shown below for the other playback functions.
Please refer to page 49 for Various playback functions.
1.Turn on the power of the connected peripheral recording device , then turn this unit on.
2.Select the playback device.
•Press the PLAY DEVICE button on the front panel to select the playback device. The indicator of the selected device will illuminate. (The indicator will not switch when a peripheral recording device is not connected.)
PLAY DEVICE
3.Press the PLAY button.
•After displaying the pausing image, playback will begin.
•The oldest recording of HDD will be played back when pressing the PLAY button for the first time after the power is turned on or the recording is finished. If you want to playback the newest recorded data, press the REV PLAY button BEFORE pressing the PLAY button after finishing recording.
4.Press the PAUSE button to pause playback.
•Press the PAUSE button again to resume playback.
The playback will stop automatically at the end of HDD (if the extra hard disk drive is installed, the hard
disk drive of the biggest ID number) or the end of the recorded part when the HDD PB REPEAT in the INITIAL SET UP is set to “OFF”. The recorded data is played back repeatedly when the HDD PB REPEAT is set to “REPEAT”. Refer to “HDD repeat playback” on page 30 for details.
5. Press the STOP button to stop playback.
INFORMATION | When recording by using more than |
|
one camera, the playback interval per camera will be the time that multiplies the recording interval by the number of the cameras.
■Basic searching function
This unit has various functions for searching the specific point of the data. The following explains the basic searching function, time date search. By using this function, you can search the specified point of the data by setting the date, hour, and minutes. Refer to pages 49 to 51 for the other searching functions.
♦Time date search
Example: To search a recording which was made on 17 May 2000, 9:25:40 p.m..
1.Press the SEARCH button to display the <SEARCH SELECTION> menu.
2.Make sure that the cursor ( 
) is set to the <TIME DATE SEARCH> menu, and turn the SHUTTLE ring to the right.
•The <TIME DATE SEARCH> menu will appear and the date number will start flashing.
<TIME DATE SEARCH>
EXECUTE OFF
To exit the <TIME DATE SEARCH> menu without activating the search, press the SEARCH but-
ton on the front of the unit.
3.Turn the JOG dial to set the date number to 17.
•Turn the SHUTTLE ring to the right. The next item will start flashing.
<TIME DATE SEARCH>
EXECUTE OFF
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• | •••••••••••••• |
14