Various settings (continued)
♦Connected SCSI device
The SCSI ID number of connected devices can be confirmed on the screen.
1.Press the INFO button.
•The <INFORMATION> menu appears.
2.Turn the JOG dial until the cursor is next to “CONNECTED SCSI DEVICE” and turn the SHUTTLE ring to the right.
•SCSI ID numbers are shown on the screen.
<CONNECTED SCSI DEVICE> SCSI ID0:HDD(30GB)
ID1:HDD( 9GB) ID2:NONE ID3:NONE ID4:DDS ID5:NONE
LIMIT OFF
3. Turn the SHUTTLE ring to the left or press the INFO button.
■Elapsed time display
The elapsed time of main HDD, archive device and copy device are shown on the screen. ELAPSED TIME for ARCHIVE or COPY will not be displayed unless an ARCHIVE device or COPY device has been connected to the unit.
The elapsed time of main HDD is counted while the unit’s power is turned on.
The elapsed time of the peripheral device (ID4) is counted as shown below:
1) While the ARCHIVE button illuminates or flashes.
<ELAPSED TIME> | 1500H | |
MAIN | ||
ARCHIVE | 200H | |
COPY | 120H |
|
2)While the PLAY or REV PLAY button illuminates or flashes when the archive device is selected as a playback device using the PLAY DEVICE button. Refer to page 14,” Basic playback” for details.
3)While the ARCHIVE indicator illuminates or flashes when restoring the data from main HDD to archive device.
The elapsed time of the peripheral device (ID5) is counted as shown below.
1)While the PLAY or REV PLAY button illuminates or flashes when the copy device is selected as a playback device using the PLAY DEVICE button. Re- fer to page 14, ” Basic playback” for details.
2)While the COPY indicator illuminates or flashes when copying the data from main HDD to the copy device.
3)While the COPY indicator illuminates or flashes when restoring the data from main HDD to the copy device.
1.Press the INFO button.
•The elapsed time is shown on the lower part of the screen.
2.After confirming the elapsed time, turn the SHUTTLE ring to the left.
•To exit the menu, press the INFO button again.
•The elapsed time of archive device or copy device will not be reset even though those devices are disconnected.
•The elapsed time of archive device includes the time when the ARCHIVE button is pressed (when pressed, the ARCHIVE button illuminates) even in the case where there is no data on the main HDD such as an alarm
•The elapsed time shown on this menu may not be consistent with the regulation guaranteed period of the stock of wearing parts subject to wear or the guaranteed life span.
INFORMATION
The elapsed time is shown up to 999999 hours at the maximum.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• | •••••••••••• | • |
32