4.Set the month, year, hour, 10 minutes digit, minute digit, 10 seconds digit and second digit in a similar fashion.
•The
<TIME DATE SEARCH>
EXECUTE OFF
5. Turn the JOG dial to select “ON”.
<TIME DATE SEARCH>
EXECUTE ON
Turn the SHUTTLE RING
>> to EXECUTE.
6.Turn the SHUTTLE ring to the right to execute.
•The time date search will start and pause the playback display at the specified time point (or the nearest point from the specified time).
•The searched image will be displayed in SPLIT 9 screen.
1
4 5 6
7 8 9
If there is no recording or no data which is recorded on the date you have set, the time date
search will not be activated and the year number will start flashing again.
If there is no data that is recorded on the time you have set, the image which is recorded on the nearest time from the time you have set will be displayed on the paused screen.
The time date search function may not work correctly depending on the condition of the recording.
7.To change the search image from SPLIT 9 screen to the single screen, select the camera number by pressing the CAMERA NUMBER button on the front of this unit.
•The selected image will be shown on the Single screen mode.
8.To play back the searched image.
•Press either the PLAY button or the PAUSE button.
Refer to page 49 for details on Various playback.
INFORMATION
Press the SEARCH button to clear the <TIME DATE SEARCH> menu.
9.Press the STOP button to stop plasyback and still frame mode.
•Press the SEARCH button, the display will revert to its original state.
■Copying the data from HDD to a copy device or an archive device
This unit can copy (all backup) the data which is recorded on hard disk drive to an archive device media or a copy device media. The following explains how to copy the data manually.
Make sure that the peripheral recording device is connected and set correctly before you start copy-
ing.
1.Turn on the power of the peripheral recording device connected to the unit.
2.Turn on the power of the unit.
3.Insert a media of an archive device Glossary or a copy device
Glossary .
4.Press the COPY button.
•The <COPY SELECTION> menu will appear.
5.Make sure that the cursor ( 
) is next to the COPY DIRECTION, and turn the SHUTTLE ring to the right.
•The
•Use JOG dial to choose the desired device to copy to and turn the SHUTTLE ring to the right to enter the selection.
<COPY | SELECTION> |
|
@COPY | DIRECTION HDD}COPY | |
OVERWRITE | OFF | |
TRANSFER PERIOD | A/B | |
6.Turn the JOG dial to move the cursor to OVERWRITE and turn the SHUTTLE ring to the right.
•The default setting is “OFF”. You have to select whether to overwrite previous recorded data (ON) or copying from the end of the recording exists on the media (OFF). Turn the JOG dial to make the desired setting to flash, then turn the SHUTTLE ring to the right to enter the selection.
<COPY | SELECTION> |
|
COPY | DIRECTION HDD}COPY | |
@OVERWRITE | OFF | |
TRANSFER PERIOD | A/B | |
|
|
|
<COPY | SELECTION> |
|
COPY | DIRECTION HDD}COPY | |
@OVERWRITE | ON | |
TRANSFER PERIOD | A/B | |
INFORMATION
The following
•If you set to “ON”, the copy will start from the very beginning of the media.
•If you set to “OFF”, the copy will start from the end of the recorded part of the media.
ENGLISH
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• | Basic Operations |
15