Print
Speed
Printing Printhead
Density
Knife Peel Mode
2.5/4.0/6.0 ips direct
transfer 203/300 dpi supported supported
8.0 ips direct
transfer 203/300 dpi not supported supported
10.0 ips direct
transfer 203 dpi only not supported not supported
12.0 ips direct
transfer 203 dpi only not supported not supported
* The 9850 minimum label feed length is 0.75 inches using 8, 10, or 12 ips printing. 94x5
emulation is not supported using 300 dpi. The maximum supply and image length with
the optional 300 dpi printhead is 12.0 inches (305 mm). The recommended print speed
using the optional verifier is 6.0 ips. Contact your Monarch Representative for supply
requirements in high temperature and high humidity environments.

9850 Serial Bar Code Printing Information

Keep in mind the following serial bar code printing information
when using a 9850 printer.
Print
Speed
Printhead
Density
Minimum Bar Code Narrow
Element
2.5 ips 203/300 dpi less than 3 dots
4.0 ips 203 dpi 3 dots
6.0/8.0/10.0 ips 203 dpi 4 dots or more
Downloading Methods
Depending on your application, you can download the format and
batch data using one of three methods: sequential method, batch
method, batch quantity zero method.

Sequential Method

Using the sequential method, you send all your format and batch
data at one time. Use this method when your application does
not require operator intervention to input data. All data is sent
down at one time, and the printer then images each field. As
soon as the last field is imaged, your labels begin to print.
6-8 Printing