254Slash zero selection must be 0 (standard zero) or 1 (slash zero).

255Supply type must be 0 (black mark), 1 (die cut), 2 (non-indexed), or 3 (aperture).

256Ribbon selection must be 0 (direct), 1 (transfer) or 2 (High Energy).

257Feed mode must be 0 (continuous) or 1 (on-demand).

258Supply position is outside the range. See "Defining the Supply Setup Packet" in Chapter 2 for more information.

259Contrast adjustment must be -390to 156 dots.

260Print adjustment must be -99to 99 dots.

261Margin adjustment must be -99to 99 dots.

262Speed adjustment must be 0 (default), 20 (2.0 ips), 25 (2.5 ips), 40 (4.0 ips), 60 (6.0 ips), 80 (8.0 ips), or 10 (10.0 ips).

263Primary monetary symbol is invalid. See "Defining the Monetary Formatting Packet" in Chapter 2 for more information.

264Secondary symbol selection must be 0 (none) or 1 (print secondary sign).

265Monetary decimal places must be 0 to 3.

266Character string length in the control characters packet must be 5 (MPCL control characters) or 7 (ENQ/IMD command character).

267Baud rate selection must be 0 (1200), 1 (2400), 2 (4800), 3 (9600), 4 (19200), 5 (38400), 6 (57600), or 7 (115200). Resend the communication settings packet or check the DIP switch settings.

8-12Diagnostics and Errors

Page 172
Image 172
Monarch 9825, 9850, 9403 manual