M a k i n g P r i n t A d j u s t m e n t s

You can adjust where the printer prints on your supply by adjusting the supply, print, or margin positions. However, keep in mind the following:

Supply adjustments across the width of your supply, such as the margin position, are based in dots- either 203 dpi or 300 dpi, depending on your printhead density.

Supply adjustments for the length of your supply, such as supply position or print adjustment, are always measured in 1/203 of an inch, regardless of your printhead density.

D e f i n i n g t h e S y s t e m S e t u p Pa c k e t

Use the system setup packet (A) to select the power up mode, display language, print separators between batches, print a "slashed zero," and select the symbol set.

Syntax {I,A,powup_mode,language,sep_on,slash_zero, symbol_set p}

A1. A

System Setup Packet

A2. powup_mode Online Mode. Options:

0online mode (default)

1offline mode (9403/9850)

A3. language Display Language. Options

0English (default)

1French

2German

3 Spanish

A4. sep_on Batch Separators. Options:

0Does not print a separator (default)

1 Prints a separator

2 Double-length separator- prints 2 tags (9850)

NOTE: Do not use batch separators with continuous (non-indexed) supply. If using a stacker, the batch separator is 3.66 inches long.

Configuring the Printer 2-9

Page 29
Image 29
Monarch 9403, 9850, 9825 manual K i n g P r i n t a d j u s t m e n t s, F i n i n g t h e S y s t e m S e t u p Pa c k e t