Changes take effect with the first character following the end of header character } of the configuration packet. Each control character must be unique and cannot appear anywhere else in your packet, except within quotation marks. You can customize the trailer characters to work with your host.

Wait two seconds for the new characters to take effect before sending packets using the new characters.

Use the following syntax for the control characters packet. Notice all but the first parameter are within quotation marks.

Syntax

{I,E,"ANSI_cd","string1","string2" p }

E1. E

Control Characters Packet

 

 

E2. "ANSI_cd"

~123

Start of header

{

(left bracket)

 

~044

Parameter

,

(comma)

 

 

separator

 

 

 

~034

Quoted strings

"

(quotes)

 

~124

Field separator

p

(pipe sign- use hex 7C)

 

~125

End of header

}

(right bracket)

 

~126

Data escape

~~

(double tilde)

 

 

character (optional)

 

 

 

def. ch.

Immediate command character (optional).

 

 

Up to any 3 characters in the 0 to 255 decimal

range. The character must be defined before this command can be used. The caret (~094) is normally used.

NOTE: "ANSI_cd" includes seven separate parameters. The

first five parameters are required. The other parameters are optional.

E3. "string 1" Terminator for status requests and ENQ requests. Up to any 3 characters in the 0 to 255 decimal range. The default is "013". Sending "" disables this sequence.

E4. "string 2" Terminator for job requests and data uploads. Up to any 3 characters in the 0 to 255 decimal range. The default is none. Sending "" disables this sequence.

Configuring the Printer 2-15

Page 35
Image 35
Monarch 9403, 9850, 9825 manual ANSIcd,string1,string2 p