268Word length selection must be 0 (7 bits), or 1 (8 bits). Resend the communication settings packet or check the DIP switch settings.

269Stop bits selection must be 0 (1 bit), or 1 (2 bits). Resend the communication settings packet or check the DIP switch settings.

270Parity selection must be 0 (none), 1 (odd), or 2 (even). Resend the communication settings packet or check the DIP switch settings.

271Flow control selection must be 0 (none), 1 (DTR), 2 (CTS/RTS), or 3 (XON/XOFF). Resend the communication settings packet or check the DIP switch settings.

272Internal code page selection must be 0 (Internal), 1 (ANSI), 2 (DOS 437), 3 (DOS 850), 4 (1250- Latin 2), 5 (1251- Cyrillic), 6 (1252- Latin 1), 7 (1253- Greek), 8 (1254- Turkish), 9 (1255- Hebrew), 10 (1256- Arabic), 11 (1257- Baltic), 12 (1258- Vietnamese), 13 (852- Latin 2), 14 (855- Russian), 15 (857- IBM Turkish), 16 (860- DOS Portuguese), 17 (Wingdings), 18 (Macintosh), 19 (UNICODE), 20 (BIG5), 21 (GB), 22 (SJIS to SJIS), 23 (GB to GB), 24 (BIG5 to BIG5), or 25 (KSC to KSC).

273Cut adjustment must be -300to 300 dots.

282RS232 Trailer string is too long. Use a maximum of 3 characters.

283ENQ Trailer string is too long. Use a maximum of 3 characters.

284The buffer type must be T (Transmit), R (Receive), I (Image), F (Format), or D (Downloadable Fonts).

285The storage device type in the memory configuration packet must be N (non-volatile RAM) or R (volatile RAM).

Diagnostics and Errors 8-13

Page 173
Image 173
Monarch 9403, 9850, 9825 manual