Option 60 (Incrementing/Decrementing Fields)You may have an application, such as serial numbers, in which
you need a numeric field to increment (increase in value) or
decrement (decrease in value) on successive tickets within a
single batch. Incrementing or decrementing can be applied to
numeric data only. If you have a field that includes letters and
digits, apply incrementing or decrementi ng to only the portion of
the field that contains digits. Do not use with Option 42 (price
field).
Syntax R,60,I/D,amount,l pos,r pos p
R1. R Opti on Header.
R2. 60 Option 60.
R3. I/D Iincrementing field
Ddecrementing field
R4. amount Amount to increase or decre ase. Range: 0- 999.
R5. l pos Leftmost position in inc/dec portion of field. If this value is not
entered, the default value 1 is us ed. Range: 0 2710
(1 - 100 for 9403).
R6. r pos Rightmost po sition in inc/dec portion of field. If this value is
not used, the entire field length is used as the default.
Range: 0 - 2710 (1 - 100 for 9403).
Example R,60,I,5,1,6 p
Increments a field by 5 each time the field is printed. The field
increments beginning with the first left position and ending with
the sixth position.
Fixing the First Number in the Incrementing Sequence
There are two ways to enter the first number in the incrementing
sequence. You can use batch data or use Option 1 to define the
first number as a fixed character.The first number in the sequence
must contain the same amount of digits as the highest number to be
counted. For example, to count the numbers 1 to 999, the first
number in the sequence must be entered as 001.
Defining Field Options 4-15