Also, keep in mind the following:
NThe Printer Applicators are released for 110-volt sales only.
NYou can use thermal direct printing (no ribbon) or thermal
transfer printing (with ribbon).
NThe Printer Applicators do not support continuous
(non-indexed) supplies.
Printer Configuration Information
The default configuration packet settings are:
{I,A,0,0,0,0,0 p
B,3,1,1,0,0 p
C,0,0,0,0,0,0 p
D,1,0,2 p
E,{,,,", p ~,--,--,Od/Oa p
F,1,1,0,0,3 p
G,1,95,95 p }
The supply type must be center aperture (3).
Backfeed must be enabled (1). The dispense
position when and backfeed distance s must be set to
95 dots using 1/8-inch gap supplies.
Status Polling Information
ENQ Response Meaning
?? Powerup
A@ Online/Ready to receive data after label
has been applied
C@ Label is printing
CH Label is printed
SB Out of supplies
SD Out of ribbon
E-4 Printer Differences