3. action AAdd configuration.
U Upload User Configuration.
4. device Storage Device. Options:
MMemory
NNonvolatile RAM
RVolatile RAM
5. units Units. (Optional parameter.) Options:
EEnglish
MMetric
GDots
Example {I,0,A,N,E p
C,0,25,0,0,0 p }
Adds a configuration to non-volatile RAM and specifies English
units. It also uses the default contrast, moves print 0.25 inches
closer to the bottom of the supply and does not change the
margin adjustment, prints at the default print speed, and uses the
default printhead width.
If you do not use the optional parameters, the syntax for the
online configuration packets does not change. For example,
{I,C,0,50,0,0,0 p }
uses the default contrast, moves print 50 dots (0.25) inches
closer to the bottom of the supply and does not change the
margin adjustment, prints at the default print speed, and uses the
default printhead width.
Example {I,0,U,N p }
Uploads the printer configuration from nonvolatile RAM and
returns the following to the host.
A,0,0,0,0,0 p
B,2,1,0,0,0 p
C,0,0,0,0,0,0 p
D,1,0,2 p
E,"~123~044~034~124~125~126","","~013~010" p
F,3,1,0,0,1 p
G,0,65,65 p
M,R,8725,1345,N,2535,615 p
M,R,R,300 p
Configuring the Printer 2-7