Motorola i90c manual Setting TTY Baud Rate, Setting Alert Timeout, Setting Return to Home, 167

Settings

IMPORTANT: When you are using HCO, the sound coming from your phone speaker may be uncomfortably loud. Use caution when putting the phone to your ear. (For information on setting your phone’s speaker volume, see “Voice Volume” on page 168.

NOTE: TTY device manufacturer’s proprietary feature such as Turbo- Code, High-Speed, and Interruption are not supported by your phone. These features must be turned off or disabled to use your TTY device with your phone.

Setting TTY Baud Rate

By default, your phone’s TTY baud rate is set to 45.45, the baud rate required for TTY calls within the US. To make calls outside the US, set your TTY baud rate to 50.0.

To change the TTY baud rate:

1From the Initial Setup screen, press R to scroll to TTY Baud.

2Press C under CHANGE.

3Press S to scroll to the baud rate for your location.

4Press C under SELECT.

Setting Alert Timeout

When you receive a voice mail message, a Text Message, or a Net Alert, your phone sounds an alert tone every 30 seconds until you view or dismiss the message. Alert Timeout sets the amount of time your phone continues to sound these alert tones.

You can set your phone to sound alert tones for 1 minute, 5 minutes, 15 minutes, 30 minutes, or 1 hour, or to continue to alert you for an unlimited amount of time, or to never sound an alert tone.

Setting Return to Home

Return to Home sets the amount of time your phone takes to return to the idle screen after a phone call or Private Call:

•After Phone — sets the amount of time your phone takes to return to the idle screen after a phone call.

167