Settings
Setting Auto Redial
When Auto Redial is set to On, if you receive a System Busy or Try Later message while making a call, the phone will redial the number automatically. You will hear a
When Auto Redial is set to Off, you must press and hold s to redial the last number dialed.
Setting Backlight Timer
The backlight illuminates the display when you receive or make calls or use the phone in poor lighting conditions. You can set the amount of time that the backlight stays on to 5, 10, 20, or 30 seconds, or set it to stay on continuously or stay off at all times.
NOTE: The photosensor judges the lighting conditions and will activate the backlight only when your phone is in poor lighting conditions.
1From the Initial Setup screen, press R to scroll to Backlight.
2Press C under CHANGE.
3Press S to scroll to the desired backlight option.
4Press C under SELECT.
NOTE: Setting the backlight to stay on continuously will decrease the amount of time you can use the phone before recharging the battery.
Setting Photosensor
To conserve battery power, the photosensor will disable the backlight when you are in good lighting conditions. To force the backlight to come on every time a key is pressed, you can turn the photosensor off.
NOTE: Turning the Photosensor to OFF will force the backlight to come on every time a key is pressed and will drain your battery power.
1From the Initial Setup screen, press R to scroll to Sensor.
2Press C under CHANGE.
