SIM Card

Accepting Your Phone’s Programming

1You will receive a Net Alert with the message New Browser Message - Receive Programming Info.

2Press C under GOTO.

3You are prompted to accept changes to your phone's lists. Press C under OK.

4A confirmation screen displays. Press C under OK.

5You are prompted again to accept changes to your phone's lists. Press C under OK.

6A confirmation screen displays. Press C under OK.

7Press r to return to the idle screen.

SIM Card

Your phone comes with a built-in level of security protection through the use of the SIM (Subscriber Identity Module) card. The SIM card stores all your Phonebook information and your Nextel account identification information. Since this information is stored on the SIM card, not in your phone itself, you can remove the information by removing the SIM card.

NOTE: Except for making emergency calls, your phone will not function without the SIM card.

The SIM card is located in the SIM card holder on the back of the phone, underneath the battery. You can verify the SIM card is in place by removing the battery and viewing the SIM card through the SIM card cover.

See “Inserting/Removing the SIM Card” on page 20 for information on locating the SIM card. If there is no SIM card in your phone, notify your Nextel Authorized Representative.

SIM Card Personal Identification Number (PIN)

To prevent unauthorized use of your account, you can protect your SIM card by enabling the SIM PIN security feature. With the SIM PIN enabled, you must enter your PIN each time the phone is powered on. You can change or disable your PIN if desired.

15

Page 23
Image 23
Motorola i90c manual Accepting Your Phone’s Programming, SIM Card Personal Identification Number PIN