Multiquip SP303520, SP303516, SP303530, SP303526 manual Blade Safety

MQ SP-3035 CONCRETE SAW

BLADE SAFETY

WARNING

ALWAYS inspect diamond blades before each use. The blade should exhibit no cracks, dings, or flaws in the steel centered core and/or rim. Center (arbor) hole must be undamaged and true.

Examine blade flanges for damage, excessive wear and cleanliness before mounting blade. Blade should fit snugly on the shaft and against the inside/outside of the saw.

Only cut the material that is specified by the blade. Read the specifications of the blade to ensure the proper tool has been matched to the material being cut.

ALWAYS keep blade guards in place. Exposure of the blade must not exceed 180 degrees.

Ensure that the blade does not come into contact with the ground or surface during transportation. DO NOT drop the blade on the ground or surface.

The engine governor is designed to permit maximum engine speed in a no-load condition. Speeds that exceed this limit may cause the blade to exceed the maximum safe allowable speed.

Ensure that the blade is mounted for proper operating direction.

MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE 13