MQ SP-3035 CONCRETE SAW

Drive System Controls

The control handle controls FORWARD-NEUTRAL-REVERSE (F-N-R) speeds and the raising and lowering of the saw. To increase forward speed, slowly move the joystick FORWARD. Pulling the joystick backward decreases saw speed, and when the joystick passes NEUTRAL the saw moves into REVERSE. Reverse speed is also controlled by the position of the joystick.

Although not a true “free wheeling” mode, the Drive Disengage handle, when pulled, allows the saw to be freely moved when the engine is not running.

DO NOT DISENGAGE WHILE ENGINE IS RUNNING.

Drive

Positraction Disengage

Lever

Speed Control

Joystick in

NEUTRAL position

Fig. 20 — Drive System Controls

WARNING

Start the engine with the Forward-Neutral-Reverse Control in NEUTRAL to prevent unexpected saw movement.

MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE 34

Page 35 Page 37
Page 36
Image 36
Multiquip SP303516, SP303530, SP303526, SP303520 manual Drive System Controls, Do not Disengage While Engine is Running
Page 35 Page 37
Top Page Image Contents