Multiquip SP303530, SP303516, SP303526, SP303520 manual Pivot Side Adjustment Side Attachment Bolts

MQ SP-3035 CONCRETE SAW

The drive wheels are aligned by adjusting the entire rear drive assembly.

1.Raise the saw halfway, then lift the rear of the saw until flanges touch the ground. Use suitable supports to prevent tipping or shifting of weight.

2.Loosen the adjustment-side attachment bolts until washers spin freely.

3.Loosen pivot-side bolts enough to move the adjustment-side wheel in the appropriate direction to achieve the desired alignment distance.

4.Tighten the Transaxle Attachment Bolts when the appropriate alignment distance is set.

Pivot Side Adjustment Side

Pivot Side

Attachment Bolts

Adjustment Side

Attachment Bolts

Fig. 46 — Drive Wheel Alignment Bolt Locations

MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE 59