Multiquip SP303520, SP303516, SP303530, SP303526 manual Saddle

MQ SP-3035 CONCRETE SAW

Spindle Mounting
	Spindle Mounting
Block
	Block
DO NOT REMOVE
	DO NOT REMOVE

Saddle

Clamps

Lower Belt

Protector

Fig. 35 — Spindle Replacement

7.Remove the Spindle.

∙DO NOT unbolt the Spindle Mounting Blocks, as they have been factory-installed for correct Spindle/wheel alignment.

8.Fill the new Spindle with approved hydraulic oil and cap.

9.Perform Steps 1-5 in reverse order.

Spacing

Spacing

Fig. 36 — Maintain equal spacing when tightening Saddle Clamps

∙Tighten Saddle Clamp bolts equally, maintaining even spacing as you reattach the Saddle Clamps. Torque bolts to 35 ft. lbs. Do Not over-torque. Apply medium strength thread lock, Blue Loctite 242 or equivalent.

MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE 49