MQ SP-3035 CONCRETE SAW

Pointer Adjustment

1.Lower the front pointer assembly: Release the rope from the cam cleat, and rotate the pointer forward into position.

2.Adjust the pointer rod by loosening the lock knob: Once the pointer rod is set to the cut line, tighten the lock knob.

3.Adjust the rear pointer to the cut line: Loosen the lock bolt, position the pointer rod, and tighten the lock bolt.

4.To raise the front pointer assembly, pull back and up on the pointer cable.

5.Secure the pointer assembly in the desired raised position by locking the cable between the jaws of the cam cleat.

Pointer

Rod

Pointer Rod

Lock Knob

Fig. 16 — Pointer Adjustment

Pointer Cable

MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE 30

Page 31 Page 33
Page 32
Image 32
Multiquip SP303516, SP303530, SP303526, SP303520 manual Pointer Adjustment
Page 31 Page 33
Top Page Image Contents