Multiquip SP303526, SP303516, SP303530, SP303520 manual Removing the Blade Guard

MQ SP-3035 CONCRETE SAW

Removing the Blade Guard

During use, the Blade Guard can become tight on the tapered mounting tab. To loosen it, wiggle the Rear Blade Guard Handle up and down, while lifting with the Top Handle.

Blade Guard Water Supply

Verify that the water hose on the saw is connected to the Blade Guard and that the water pipes are pointed into both Blade Collars.

	Make sure that the outlets of the water tubes point toward the lower
	portion of the blade collars, aimed at the delivery ports, for proper
NOTE	water delivery to the blade.

Water Tube bracket

Water Tube aimed at groove in Blade Collar

Blade Collar

Fig. 10 — Water Tubes and the Blade Collar

MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE 24