Multiquip SP303530, SP303516, SP303526, SP303520 manual Engine Power, Cutting Power & Sheave Size

MQ SP-3035 CONCRETE SAW

Engine Power, Cutting Power & Sheave Size

WARNING

NEVER tamper with factory settings of engine governor or speed settings. Ensure the proper Speed Kits are installed to safely support the prescribed RPM settings for diamond blade operations.

Blade Size & Configuration per Model

The SP-3035 is available in four Blade Speed configurations. The following chart shows the various configurations for each model.

Blade	Model	Engine	Spindle	Governor	Ratio	Engine	Engine	Spindle	Spindle	Surface
Size		RPM No	RPM No	Setting	Kit	Pulley	Pulley	Pulley Part	Pulley	Feet Per
		Load	Load	(Hole		Part	Size	Number	Size	Minute
				Number)		Number
16"	Q303516	3000	3000	12	25603	540000	3.8"	540006	3.8"	12566
20"	Q303520	2520	2800	9	25849	540070	3.6"	540066	4.0"	13195
26"	Q303526	2000	2800	7	35103	540012	3.0"	540065	4.2"	13614
30"	Q303530	1773	2600	5	35104	540012	3.0"	540049	4.4"	13923

When choosing a blade for your cutting conditions, follow the blade manufacturer’s recommendations. Match blade RPM (Spindle RPM) to the recommended blade Surface Feet Per Minute (SFPM).

SFPM	12” dia.	14”	16” dia.	18” dia.	20”	24” dia.
	RPM	dia.	RPM	RPM	dia.	RPM
		RPM			RPM
8,000	2546	2183	1910	1698	1528	1273
8,500	2706	2319	2029	1804	1623	1353
9,000	2865	2456	2149	1910	1719	1432
9,500	3024	2592	2268	2016	1814	1512
10,000	3183	2728	2387	2122	1910	1592
10,500	3342	2865	2507	2228	2005	1671
11,000	3501	3001	2626	2334	2101	1751
11,500	3661	3138	2745	2440	2196	1830
12,000	3820	3274	2865	2546	2292	1910
12,500	3979	3410	2984	2653	2387	1989
13,000	4138	3548	3104	2759	2483	2069

26”	30”
dia.	dia.
RPM	RPM
1175	1019
1249	1082
1322	1146
1396	1210
1469	1273
1543	1337
1616	1401
1690	1464
1763	1528
1836	1592
1910	1655

MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE 19