Multiquip SP303526, SP303516 manual Draining & Filling the Hydraulic System, To drain the Transaxle

MQ SP-3035 CONCRETE SAW

Draining & Filling the Hydraulic System

To drain the Transaxle

1.Remove the drain plug from the bottom of the Spindle housing and the bottom of the Transaxle.

Drain Plug

Fig. 43 — Transaxle Drain Plug

Collect and dispose of the used oil and oil filter in an environmentally friendly manner. Do not drain onto the ground or pour used oil down

NOTE drains.

2.Remove the old oil filter. See Fig. 43, above.

3.Once drained, reinstall the drain plugs.

4.Pre-fill and install a new oil filter.

5.Refill the Transaxle with hydraulic oil as outlined on page 58

CAUTION

Pre-fill the oil filter with oil prior to installing to prevent hydraulic pump damage.

To drain the Spindle

	The fully enclosed Spindle eliminates most maintenance. However, if
the Spindle ever needs service or repair, contact Multiquip, at the
NOTE	number listed in the inside of the front cover for details.

MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE 56