|
| Disassembly and Reassembly |
|
| |
| 3.2 White Roller Ass,y |
|
| ||
|
|
|
|
| |
1. Open the OPE Unit. |
| 2. Push the Bushing on RH end of the roller slightly inward, | |||
|
|
| then rotate it until it reaches the slot as shown below. | ||
|
|
| |||
|
|
| Then lift the roller out. | ||
White Roller |
2 |
Bush |
1 |
Note: Check the roller for any dirt. Clean with a soft cloth dampened with water.
If the roller is heavily worn replace it with a new one.
3.3 Rear Cover
1.Remove the four screws securing the Rear Cover and remove it, as shown below.
Rear Cover |
2.Unlatch the Face up Cover Securing the Rear Cover, as shown below. Then lift the Face up Cover out.
Service Manual | |
|
