Adjustment and Troubleshooting
2) Abnormal Printing
Description: Printing does not work – even after replacing the cable
Printer does not work at all or strange fonts are printed,
1.Set up the parallel port using CMOS SETUP.
2. Printer Driver Error.
3.Error message “insufficient memory”.
(The printing job sometimes stops due to
insufficient virtual memory, this is
caused by insufficient space
on the hard disk.)
Ensure that ECP (best) or SPP is selected in the CMOS (BIOS) setup.
Ensure that the correct driver is loaded. Use the driver supplied on the CD or downloaded from the web site.
DO NOT use the Microsoft driver supplied with the Windows operating system. If the printer is a GDI or SPL type printer ensure that ALL OTHER GDI or SPL drivers are uninstalled as Windows allows only 1 of this type of driver to be loaded.
Delete any unnecessary files to secure enough space on the hard disk and start the print job again.
Service Manual
