Muratec F-114P service manual Cis, Exit Roller

Disassembly and Reassembly

3.8 CIS

1.Before you remove the CIS, you should remove:

-White Roller Ass'y (see section 3.2)

-Rear Cover (see section 3.3)

2.Unplug the CIS connector from the Main PBA. (CN14)

CIS

CIS

3.Unlatch the CIS using a flat-blade screwdriver and release it, as shown below. Disconnect harness from CIS unit.

CIS

1

2

3.9 Exit Roller

1. Open the OPE Unit.	2. Pull up the Exit Roller using a flat-blade screwdriver
	and remove it, as shown below.
	Exit Roller
	2
	1

Service Manual 3-7 Samsung Electronics