Disassembly and Reassembly
3.22 Fuser Ass'y
1.Before you remove the Fuser Ass'y, you should remove:
- Engine Shield Ass,y (see section 3.19)
2.Unplug the two connectors from the Main PBA and SMPS, as shown below. Then remove the four screws securing the Fuser Ass'y and remove it.
Fuser Ass'y |
4.Remove the two screws securing the Halogen Lamp. Then take out the Halogen Lamp from the Heat Roller, as shown below.
Heat Roller |
Halogen Lamp |
3.Remove the two screws securing the Thermostat. Then lift the Thermostat out.
Thermostat |
5.Remove one screw securing the Idle Gear and remove it.
Idle Gear |
Service Manual | |
|
