Muratec F-114P service manual Drive Assy, DC-Fan

Disassembly and Reassembly

3.15 Drive Ass'y

1.Before you remove the Drive Ass'y, you should remove:

-Rear Cover (see section 3.3)

-Side Cover L (see section 3.4)

Note : When re-fitting the Drive Ass’y tighten the screws in the order that they are numbered on the base plate.

2.Remove the six screws securing the Drive Ass'y and remove it. Then unplug the one connector from the Drive Motor, as shown below.

Drive Ass'y

3.16 DC-Fan

1.Before you remove the Fan, you should remove:

-Rear Cover (see section 3.3)

-Side Cover R (see section 3.5)

2.Unplug the one connector from the SMPS, as shown below. Then take out the Fan.

DC Fan

Service Manual 3-13