Disassembly and Reassembly
3.6 OPE Unit
1.Before you remove the OPE Unit, you should remove: - Rear Cover (see section 3.3)
2.Unplug the OPE connector from the Main PBA and Scan Motor Harness, as shown below.
Then remove the two screws securing the Ground Cable and remove it. Note the position of the bronze earth plate.
Speaker |
3.Open the OPE and release the latch from Holder, as shown below.
4.Carefully release the latches from Top Cover in the direction of the arrow, as shown below.
1 |
OPE Unit |
2 |
5.Remove the two screws securing the Scan Upper Ass'y and remove it.
OPE |
Scan |
Upper Ass'y |
Service Manual | |
|
