Disassembly and Reassembly
3.23 Transfer Ass'y
1.Before you remove the Transfer Ass'y, you should remove:
- LSU (see section 3.18)
2.Remove the three screws securing the Transfer Earth and remove it.
Transfer |
Earth |
3.Unplug the PTL Holder connector, then remove the PTL Holder and PTL Lens, as shown below.
| PTL |
PTL | Lens |
Holder |
|
4.Release the frame latch at the R side of the Transfer roller and lift the roller out. Release the latch on each bush and lift them out.
Transfer |
Roller |
Bush |
Service Manual | Samsung Electronics | |
|
