Disassembly and Reassembly
3.11 Scan Ass'y
1.Before you remove the Scan Ass'y, you should remove:
-Rear Cover (see section 3.3)
-Side Cover L (see section 3.4)
-Side Cover R (see section 3.5)
-Front Cover (see section 3.10)
2.Unplug the three connectors (OPE, CIS, scan motor) from the Main PBA. Then remove the two Ground Cables, as shown below.
| OPE |
CIS | CIS |
| OPE |
3.Remove the four screws securing the Top Cover and remove the Scan Ass'y, as shown below.
Scan Ass'y |
Service Manual | |
|
