Product spec and feature
2.2.3 System Layout
2.2.3.1 Feeding section
There is a universal cassette which automatically loads paper and the manual feed which supplies paper single sheet at a time. The cassette has a friction pad which separates paper to ensure single sheet feeding, and it has a sensor, which checks when the paper tray is empty.
-Feeding Method: Universal Cassette Type
-Feeding Standard: Center Loading
-Feeding Capacity:
-Paper detecting sensor: Photo sensor
-Paper size sensor: None
2.2.3.2Transfer Ass’y
This consists of the PTL
The transfer roller transfers toner from the OPC drum surface to the paper.
-Life expectancy: Over 60,000 sheets (at 15~30°C)
2.2.3.3Driver Ass’y
-Gear driven power unit. The motor supplies power to the paper feed unit, the fuser unit, and the toner cartridge.
2.2.3.4 Fixing Part(Fuser)
-The fuser consists of the Heat Lamp, Heat Roller, Pressure Roller, Thermistor, and Thermostat. It fixes toner to the paper using pressure and heat to complete the printing job.
2.2.3.4(a) Temperature-Intercepting Device (Thermostat)
The thermostat is a temperature sensing device, which cuts off the power to the heat lamp to prevent overheating fire when the heat lamp or heat roller overheats.
2.2.3.4(b) Temperature Detecting Sensor (Thermistor)
The Thermistor detects the surface temperature of the heat roller, this information is sent to the main processor which uses this information to regulate the temperature of the heat roller.
2.2.3.4(c) Heat Roller
The surface of the Heat Roller is heated by the Heat Lamp. As the paper passes between the Heat and Pressure rollers the toner is melted and fixed permanently to the paper. The surface of the roller is coated with Teflon. This ensures that toner does not adhere to the roller surface.
2.2.3.4(d) Pressure roller
The Pressure Roller mounted under the heat roller, it is made of a silicon resin, and the surface of the roller is coated with Teflon. This ensures that toner does not adhere to the roller surface.
Service Manual | |
|
