Disassembly and Reassembly
3.18 LSU-Unit
1.Before you remove the LSU, you should remove: - Scan Ass'y (see section 3.11)
2.Unplug the two connectors from the LSU, as shown below.
3.Remove the four screws securing the LSU and remove it.
LSU |
3.19 Engine Shield Ass'y
1.Before you remove the Engine Shield Ass'y, you should remove:
-Rear Cover (see section 3.3)
-Side Cover L (see section 3.4)
-Side Cover R (see section 3.5)
2.Remove the twelve screws securing the Engine Shield Ass'y and remove it. Then unplug the all connectors from the SMPS and Main PBA, Main High PBA.
Engine Shield |
Ass'y |
Service Manual | |
|
