Alignment & Troubleshooting
NO. Not Assigned
Meaning: The speed dial location you tried to use has no number assigned to it.
Solution: Dial the number manually with the keypad, or assign the number.
[No Paper]Add Paper
Meaning: The paper cassette is empty. The printer system stops.
Solution: Load new paper in the paper tray.
Operation NotAssigned
Meaning: You are doing in the Add/ Cancel operation, but there is no jobs waiting.
Solution: Check the display to see if there is any scheduled job. The display should
indicate them in Standby mode, for example, Delay Fax.
[Paper Jam 0]Open/Close Door
Meaning: Paper has jammed in paper feeding area. Paper is jammed in
Solution: Press STOP and clear the jam.
[Paper Jam 1]Open/Close Door
Meaning: | Paper has jammed inside the unit. Paper has jammed in paper exit unit. |
Solution: | Clear the jam. |
[Paper Jam 2]Check Inside | |
Meaning: | Paper has jammed inside the unit. Paper has jammed in fuser area. |
Solution: | Clear the jam. |
Power Failure |
|
Meaning: | Power has turned off then on and the machine’s memory has not been saved. |
Solution: | You need to start again the job which you were trying to do before the power failure. |
Retry Redial? |
|
Meaning: | The machine is waiting for the programmed interval to automatically redial. |
Solution: | You can press START to immediately redial, or STOP to cancel the redial operation. |
[Stop Pressed] |
|
Meaning: | The Stop/Clear button is pressed during a copy or fax operation. |
Solution: | Try again. |
[Toner Empty] |
|
Meaning: | The toner cartridge has run out. The machine stops printing. |
Solution: | Replace with a new toner cartridge. |
[Toner Low] |
|
Meaning: | The toner cartridge is almost empty. |
Solution: | Take out the toner cartridge and gently shake it. By doing this, you can temporarily |
| reestablish printing operations." |
Service Manual | |
|
