with the device type.
-10090 badRPGErr The individual range, polarity, and gain
settings are valid, but the combination is
not allowed.
-10091 badIterationsErr You have attempted to use an invalid
setting for the iterations parameter. The
iterations value must be 0 or greater.
Your device may be limited to only two
values, zero and one.
-10092 lowScanIntervalError Some devices require a time gap between
the last sample in a scan and the start of
the next scan. The scan interval you have
specified does not provide a large
enough gap for the device. See the
SCAN_Start function in the language
interface API for an explanation.
-10093 fifoModeError FIFO mode waveform generation cannot
be used because at least one condition is
not satisfied.
-10100 badPortWidthErr The requested digital port width is not a
multiple of the hardware port width.
-10120 gpctrBadApplicationError Invalid application used.
-10121 gpctrBadCtrNumberError Invalid counterNumber used.
-10122 gpctrBadParamValueError Invalid paramValue used.
-10123 gpctrBadParamIDError Invalid paramID used.
-10124 gpctrBadEntityIDError Invalid entityID used.
-10125 gpctrBadActionError Invalid action used.
-10200 EEPROMreadError Unable to read data from EEPROM.
-10201 EEPROMwriteError Unable to write data to EEPROM.
-10240 noDriverErr The driver interface could not locate or
open the driver.
-10241 oldDriverErr One of the driver files or the
configuration utility is out-of-date.
-10242 functionNotFoundErr The specified function is not located in
the driver.
-10243 DSPconfigFileErr The driver could not locate or open the
configuration file, or the format of the
configuration file is not compatible with
the currently installed driver.