-10254 DAQCardConfErr The DAQCard cannot be configured
because 1) the correct version of the card
and socket services software is not
installed, 2) the card in the PCMCIA
socket is not a DAQCard, or 3) the base
address and/or interrupt level requested
are not available according to the card
and socket services resource manager.
Try different settings or use AutoAssign
in the NI-DAQ configuration utility.
-10256 dmaChannel1Error Bad DMA channel 1 specified in the
configuration utility or by the operating
system.
-10257 baseAddressError Bad base address specified in the
configuration utility.
-10258 dmaChannel1Error Bad DMA channel 1 specified in the
configuration utility or by the operating
system.
-10259 dmaChannel2Error Bad DMA channel 2 specified in the
configuration utility or by the operating
system.
-10260 dmaChannel3Error Bad DMA channel 3 specified in the
configuration utility or by the operating
system.
-10340 noConnectErr No RTSI signal/line is connected, or the
specified signal and the specified line are
not connected.
-10341 badConnectErr The RTSI signal/line cannot be
connected as specified.
-10342 multConnectErr The specified RTSI signal is already
being driven by a RTSI line, or the
specified RTSI line is already being
driven by a RTSI signal.
-10343 SCXIConfigErr The specified SCXI configuration
parameters are invalid, or the function
cannot be executed with the current
SCXI configuration.
-10360 DSPInitErr The DSP driver was unable to load the
kernel for its operating system.