-10370 badScanListErr Possible reasons for this error are as
follows.
• The scan list is invalid; for example,
you are mixing AMUX-64T
channels and onboard channels.
• You are scanning SCXI channels out
of order.
• The driver attempts to achieve
complicated gain distributions over
SCXI channels on the same module
by manipulating the scan list, and
returns this error message if it fails.
-10400 userOwnedRsrcErr The specified resource is owned by the
user and cannot be accessed or modified
by the driver.
-10401 DSPunknownDeviceErr The specified device is not a National
Instruments product, or the driver does
not support the device (e.g., the driver
was released before the device was
supported).
-10402 deviceNotFoundErr No device is located in the specified slot
or at the specified address.
-10403 DSPdeviceSupportErr The specified device does not support the
requested action (the driver recognizes
the device, but the action is inappropriate
for the device).
-10404 noLineAvailErr No line is available.
-10405 noChanAvailErr No channel is available.
-10406 noGroupAvailErr No group is available.
-10407 lineBusyErr The specified line is in use.
-10408 chanBusyErr The specified channel is in use.
-10409 groupBusyErr The specified group is in use.
-10410 relatedLCGBusyErr A related line, channel, or group is in
use. If the driver configures the specified
line, channel, or group, the configuration,
data, or handshaking lines for the related
line, channel, or group are disturbed.
-10411 counterBusyErr The specified counter is in use.
-10412 noGroupAssignErr No group is assigned, or the specified
line or channel cannot be assigned to a